XCAP ONE Get notified at launch

Available January 2027

CAM and DNC. One software.

From program to machine.
Seamlessly.

CAM and CNC program management brought together in a single platform. From STEP part to CNC program, with no re-entry.

Get notified at launch See the workflow

The platform

Two proven programs. One platform.

XCAP ONE was born from the merger of GP Software's two programs. CAM and DNC: what your teams used to do in two tools now happens in a single platform.

Building block 1 · CAM

XCAP CAM

Computer-aided manufacturing: prepare machining operations, simulate toolpaths and generate CNC programs.

Building block 2 · DNC

XCAP DNC

Program management: distribute, track and centralize programs across your machine fleet.

One interfaceYour XCAP programs carried overOne point of contact

The workflow

Four steps, one continuous thread.

Import, drawing, machining, cutting conditions from your database, post-processor: no re-entry from part to CNC program.

01 · CAM

Define the machining

Import the part (STEP, IGES, DXF…), orient it and produce the 2D drawing: views, sections, dimensions. Then define the 2.5D operations: pockets with islands, contouring, drilling, tapping, facing, slotting, chamfering, engraving, as well as 3D roughing of simple shapes. Turning available as an option.

CAM

02 · Simulate

Check before you cut

Simulation in 2D and 3D: toolpaths and removed material. XCAP ONE checks heights (clearance, top of stock, bottom) and warns you of any inconsistency, so you spot a misplaced pass on screen rather than at the machine.

CAM

03 · Program

Generate the CNC program

Your controller's post-processor generates the program. Cutting conditions are pre-filled from your database.

CAM

04 · Machine

Send to the machine

Network, serial link or PCMCIA card: the program reaches the machine in whatever way it accepts. Every transfer is logged and every program versioned.

DNC

Post-processors

A post-processor tuned for each of your machines.

Two machines with the same CNC controller don't always expect the same program. GP Software adjusts the post-processor to each of your machines and to the way you work, for a program that is ready to run.

  • FANUC
  • HAAS
  • SIEMENS
  • HEIDENHAIN
  • FAGOR
  • Standard FANUC included. A FANUC post-processor ships with the software.
  • 5 CNC families available. FANUC, HAAS, SIEMENS, HEIDENHAIN and FAGOR, ready to import into XCAP ONE.
  • Tuned by GP Software. Each post-processor is adjusted to your machine, on quotation.
  • Your controller isn't on the list? We develop a custom post-processor for it.

Who it's for

What XCAP ONE changes for you.

CNC programmer

One tool from workstation to machine

  • Less back and forth. Import, draw, program and simulate without switching software.
  • Cutting conditions ready to go. They are pre-filled from your tool and material database.
  • Familiar XCAP landmarks. The same cycle and field names, and the “Open a CAM file” window from the previous software.
  • A workstation set up for the shop floor. Light or dark theme, adjustable text and icon size: everyone adapts the screen to their workstation and the shop lighting.

Production manager · Executive

A more reliable shop, a single contract

  • Fewer errors at the machine. Simulation before machining and height checks, with blocking errors and warnings.
  • Traceability. Every transfer logged, every program versioned: you know which version is running on which machine.
  • One vendor, one support team. A single piece of software to maintain and a single point of contact at GP Software.
96%

of the operations in your XCAP programs (.cam) carried over on opening, across 3,041 customer files tested

5

CNC families: FANUC, HAAS, SIEMENS, HEIDENHAIN and FAGOR post-processors, tuned for your machine

0

re-entry, from STEP part to CNC program

Already using XCAP?

Move to XCAP ONE with your maintenance contract.

Whether you use XCAP CAM, XCAP DNC or both, you can switch to XCAP ONE if your maintenance contract is up to date.

Maintenance contract up to date

You switch to XCAP ONE

  • You use XCAP CAM
  • You use XCAP DNC
  • You use both

Your .cam programs open directly in XCAP ONE: 96% of operations are carried over, and the rest are flagged on opening, never silently lost. A wizard imports your tools, cutting conditions, materials, folders and users.

Prepare my January switchover

Contract to be checked

Not sure where your contract stands?

Tell us which XCAP software you use. We will check your maintenance contract and tell you how to access XCAP ONE.

Not using XCAP yet? Sign up to be notified at launch.

Check my contract

LAUNCHING JANUARY 2027

Be among the first to discover XCAP ONE.

XCAP ONE will be available in January 2027. Leave your details: we will let you know as soon as it launches and invite you to the first presentations. Already an XCAP customer? We will check your maintenance contract and prepare your switchover.

Software vendor GP Software